This product is one of the classic products of the Brother brad as it has modern features and an economic low ink advantage. The print heads are of two types; there is a printhead for monochrome, that is the piezo with 210 from one nozzle while the nozzle for the color printhead is three, the internal memory ability of the printer 64 MB of RAM.
Brother DCP-J925DW printer driver Supported Windows Operating Systems
|Supported OS: Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows Vista 32-bit, Windows Vista 64-bit, Windows XP 32-bit, Windows XP 64-bit|
|Printer Full Drivers for Windows 7 8 8.1 10 vista xp 32 bit and 64 bit.EXE||134.83||Download|
Brother DCP-J925DW driver Supported Mac Operating Systems
|Supported OS: Mac OS Catalina 10.15.x, macOS Mojave 10.14.x, macOS High Sierra 10.13.x, macOS Sierra 10.12.x, Mac OS X El Capitan 10.11.x, Mac OS X Yosemite 10.10.x, Mac OS X Mavericks 10.9.x, Mac OS X Mountain Lion 10.8.x, Mac OS X Lion 10.7.x, Mac OS X Snow Leopard 10.6.x, Mac OS X Leopard 10.5.x|
|Printer Driver for Mac 10.15.dmg||23.10 MB||Download|
|Printer Driver for Mac 10.14.dmg||23.20 MB||Download|
|Printer Driver for Mac 10.13 and 10.12.dmg||23.42 MB||Download|
|Printer Driver for Mac 10.11.dmg||23.48 MB||Download|
|Printer Driver for Mac 10.10.dmg||23.37 MB||Download|
|Printer Driver for Mac 10.9.dmg||24.08 MB||Download|
|Printer Driver for Mac 10.8.dmg||28.81 MB||Download|
|Printer Driver for Mac 10.7 and 10.6.dmg||27.05 MB||Download|
|Printer Driver for Mac 10.5.dmg||19.68 MB||Download|
|Scanner Driver for Mac 10.15.dmg||2.28 MB||Download|
|Scanner Driver for Mac 10.14.dmg||293.09 MB||Download|
|Scanner Driver for Mac 10.13.dmg||293 MB||Download|
|Scanner Driver for Mac 10.12.dmg||293.07 MB||Download|
|Scanner Driver for Mac 10.8 to 10.11.dmg||294.43 MB||Download|
|Scanner Driver for Mac 10.7 to 10.10.dmg||6.53 MB||Download|
|Scanner Driver for Mac 10.6.dmg||4.89 MB||Download|
|Scanner Driver for Mac 10.5.dmg||2.08 MB||Download|
The control panel of the printer has a liquid crystal display (LCD) touchscreen 3.3 inches in diagonal while the same TFT component is in color LCD. The source of power for the printer to perform well and correctly is the alternating current (AC) of a voltage between 220 and 24 volts at a frequency is 50/60 Hz. An exception to that rule is the printer in use in Taiwan that requires only an AC voltage between 100 and 120 volts.
The rate at which this printer consumes power depends on which operation is currently in place. For instance, the copying function consumes approximately 24 watts; the ready mode can run at a power demand of 6.5 watts. The sleep mode requires an employ a power usage of about 2.5 watts and switches off itself after some seconds.
Physically, the dimensions of the printer involve a body of height 180 mm, a width of 405 mm, and a depth of 374 mm. The weight of the printer itself is about 9.3 kg. The operating noise of the printer is about 50 dB or even lesser. This device has support for an automatic document folder (ADF) that can hold up to 15 pages of paper or even up to 20 pages under certain special conditions.
The supported media types in this printer include envelopes, plain sheet, thick, thin, thicker, A5, A6, executive, envelopes, and monarch. The maximum input paper capacity is approximately 100 sheets with a standard weight of 80 gsm. Download Brother DCP-J925DW driver from Brother Website
[Installation Instructions] How to Download / Installation procedure
Note: Do not connect the USB cable until requested by the installer. If you connect to the network, make sure the network cable is connected before running the installer
- Close all software programs running on your computer.
- Turn on the printer.
- Click the Download button on this page.
- Click the downloaded file. The files will be extracted and the installation process will automatically begin.
- Follow the instructions on the screen to continue and complete the installation.
- Download the file. For the location where the file is saved, check the computer settings.
- Double-click the downloaded file and mount it on the Disk Image.
- Double-click the mounted Disk Image.
- Double-click the packaged file in the folder. Installation starts automatically.
To install later, select Save in step 4 and choose a location on your hard disk. When ready to install, search and double-click the file. This will automatically extract and start the installation process. Follow the instructions on the screen to continue the installation.
if there is a link error please report to us via the Contact. Thank you for your participation in downloading the latest printer drivers download for your Printer so that your driver and software are always updated.